Description
OREI UHD-EXM500-K: 4K HDMI Extender UPTO 500 FT
- Features ipcolor STREAM technology for high-definition audio/video transmission with low-latency.
- Video resolutions up to 4K@60Hz.
- Compatible with Cat5/5e/6 or above network cables. For extending signal up to 120M(500Feet) use CAT6 Round -Shielded cable.
- Supports one-to-one or one-to-many connections through a network switch.
- Additional Receivers can be added to the setup via a network switch or through a network switch cascade as well.
- Features HDMI output on the Transmitter to connect a display at the source.
- One-way IR transmission (20~60kHz) from the Receiver to the Transmitter: enabling source device control from the Receiver end.
- The device also supports control through RS-232.
- Micro USB ports on the device can be used for Firmware upgrades.
- Lightning protection, surge protection, ESD protection
The UHD-EXM500-K consists of a Transmitter and Receiver allowing you to extend HDMI audio/video signal to another location up to 500 Feet away using a CAT6/7 cable. The extender features ipcolor STREAM technology for high-definition and low-latency transmission.
The device supports video resolutions up to 4K@60Hz. It features an HDMI output on the Transmitter to connect a display at the source. The extender can be connected one-toone through a CAT cable or one-to-many via a network switch.
It also work with multiple switch cascades. Features One-way IR transmission from Receiver to the Transmitter; enabling control of the source device from the Receiver end. The device also supports control through RS-232.
[shortdes]
- Video resolutions up to 4K@60Hz
- Compliance: HDMI 2.0 - HDCP 1.4/2.2
- One-way IR control
[/shortdes]
Estimate shipping
We are here to help!
If you are having any trouble with locating the correct replacement, part number, or assistance with diagnosis please do not hesitate to reach out to us.
Support